| Scheduled Conference | Title | |
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | A NOVEL APPROACH FOR AUTOMATIC MACHINING FEATURE RECOGNITION WITH EDGE BLEND FEATURE | Abstract |
| CHEN WONG KEONG, YUSRI YUSOF | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | A review on methods for assessing risk factors of the upper limb disorders among cashiers in grocery retail industries | Abstract |
| muhammad fareez ahmad zuhaidi | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | A study on tensile deformation at room temperature and elevated temperature in the directional solidified Ni-base superalloy GTD-111 | Abstract |
| Ahmad Afiq Pauzi | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | An Analysis of Iron Flux Bridges Topologies for 12Slot-14Pole HE-FSM | Abstract |
| Siti Khalidah Rahimi, Md. Zarafi Ahmad | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | An Evaluation of Mechanical Properties on Kenaf Natural Fiber/Polyester Composite Structures as Table Tennis Blade | Abstract |
| Ahmad Mubarak Tajul Arifin | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | An investigation of Viscosities, Calorific Values and Densities of Binary Biofuel Blends | Abstract |
| Sharzali Che Mat, Mohamad Yusof Idroas, Teoh Yew Heng, Mohd Fadzli Hamid | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Analysis of the Effect of Injection Pressure on Ignition Delay and Combustion Process of Biodiesel from Palm Oil, Algae and Waste Cooking Oil | Abstract |
| Amir Khalid | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | CHARACTERIZATION AND THERMAL PROPERTIES OF NITRATE BASED MOLTEN SALT FOR ENERGY RECOVERY SYSTEM IN APPLIED ENERGY | Abstract |
| Mohd Faizal Tukimon, Wan Nur Azrina Muhammad | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Characterization of bottom and fly ashes generated co-incineration of biomass with automotive shredded residue | Abstract |
| Muhamad Fazli Othaman | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Combination of skid control and direct yaw moment control to improve the safety and stability of the small electric vehicle with two in-wheel motors | Abstract |
| Mohamad Heerwan Peeie | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Combined-hole film cooling with the application of double flow control devices | Abstract |
| Mohammad Kamil Abdullah | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Continuous Improvement and its Barriers in Electrical and Electronic Industry | Abstract |
| Md Fauzi Ahmad | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Design and Development of a Portable Metal Chip Baler using A System Design Approach | Abstract |
| Mohd Fahrul Hassan, Mohd Faiz Afham, Ahmad Mubarak Tajul Arifin, Al Emran Ismail, Mohd Rasidi Ibrahim, Mohammad Zulafif Rahim, Md Fauzi Ahmad | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Design of Automation System for Ceramic Surface Quality Control Using Fuzzy Logic Method at Balai Besar Keramik (BBK) | Abstract |
| Anggie Prahas Putri, Haris Rachmat, Denny Sukma Eka Atmaja | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Designing Train Passenger Seat by Kansei Engineering in Indonesia | Abstract |
| Hapsari Nabila Sakya, Teddy Sjafrizal, Rino Andias Anugraha | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Developing new designs of Tool Holder for Ultrasonic Vibration Assisted Turning in 2-dimensional using Finite Element Analysis | Abstract |
| Rino Andias Anugraha, Rasidi Ibrahim, Haris Rachmat | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Development of Health and Safety E-Vestibule Training Module Based on Novel Hazard Controlling Measures for Malaysian Oil and Gas Drilling Industries: A Proposed Concept | Abstract |
| Muhammad Mujtaba Asad, Razali Bin Hassan | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Direct Investment Casting For Pattern Developed By Desktop 3D Printer | Abstract |
| Omar Mohd Faizan Marwah | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Doctor / Detached-Eddy Simulation of Trailing-Edge (TE) Cutback Turbine Blade Cooling | Abstract |
| Marwan Effendy | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Effect of carbon content on structural and magnetic properties of Fe-Mn metastable alloys | Abstract |
| Kontan Tarigan | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Effect of Rotating Mold Speed on Microstructure of AL LM6 Hollow Cylinder Fabricated Using Centrifugal Method | Abstract |
| Maximus Kohnizio Mahli | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Effect of triggering angles on the crushing mechanisms of hybrid woven kenaf/aluminum hollow cylinders | Abstract |
| Al Emran Ismail | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Effect of welding speed on microstructure and mechanical properties due to the deposition of reinforcements on friction stir welded dissimilar aluminium alloys | Abstract |
| Baridula Ravinder Reddy | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Enhancement of mechanical properties of epoxy/graphene nanocomposite | Abstract |
| Nurul Idani Che Berhanuddin, Izzuddin Zaman, Syaiful Azmirul Mohd Rozlan, Mohd Aizat Abdul Rahim | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Evaluation of Injection Molding Process Parameters for Manufacturing Polyethylene Terephthalate | Abstract |
| Omar Mohd Faizan Marwah | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Evaluation on Compression Properties of Different Shape and Perforated rHDPE in Concrete Structures | Abstract |
| Mohd Yuhazri Yaakob | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Experiment on the Effects of Storage Duration of Biodiesel produced from Crude Palm Oil, Waste Cooking oil and Jatropha | Abstract |
| Amir Khalid | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Experimental study on the usage of air-cooled heat pipe for cooling of HEV Li-ion battery | Abstract |
| FAIZA MOHAMED NASIR | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Exposure Level of Ergonomic Risk Factors in Grocery Retail Industries | Abstract |
| Mohd Nasrull Abdol Rahman, Muhammad Fareez Ahmad Zuhaidi | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Factors to consider in selecting an organisational improvement initiative: Survey results | Abstract |
| Musli Mohammad, Maher Ali Hussein, Mohd Shahir Yahya | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Feasibility study on production of Metal Matrix Composite (MMC) material for Electrical Discharge Machining (EDM) tools using Rapid Prototyping (RP) technique | Abstract |
| Shazarel Bin Shamsudin | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Feedback survey on the usability of the OFFERA method for assessing an exposure risk of computer works related to WMSDs | Abstract |
| Mohd Nasrull Abdol Rahman, Siti Shafika Mohamad | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Flame Spread Behavior over Combustible Solid of Paper, Bagasse and Paper/Bagasse | Abstract |
| Afifah Ramli, Mohd Azahari Razali, Azwan Sapit, Akmal Nizam Mohammed, Normayati Nordin, Amir Khalid, Md Nor Anuar Mohammad | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Flexibility Improvement on Energy Consumption of Punching Machine Based on Green Manufacturing Method at PT Buana Intan Gemilang | Abstract |
| Firda Mawaddah, Haris Rachmat, Tatang Mulyana | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Flow Simulation of Modified Duct System Wind Turbines Installed on Vehicle | Abstract |
| Nurhayati Bt Rosly | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Green Density Optimization of Stainless Steel Powder via Metal Injection Molding by Taguchi Method | Abstract |
| Azriszul Bin Mohd Amin | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Ground proximity effect on the flow over NACA 4412 multi element airfoil in clean configuration | Abstract |
| Aslam Abdullah, Muhammad Nasreen Yazi, Mohammad Fahmi Abdul Ghafir, Sofian Mohd, Mohammad Zulafif Rahim | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | HYBRID MICRO-HYDRO ELECTRICAL POWER SYSTEM DEVELOPMENT IN ENDAU ROMPIN NATIONAL PARK, JOHOR | Abstract |
| Azli Yusop | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Implementation of Total Productive Maintenance (TPM) to Improve Sheeter Machine Performance | Abstract |
| Nofri Eka Candra, Anita Susilawati, Herisiswanto Herisiswanto, Wahyu Setiady | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Improvement of solid-gas interaction in fluidized bed systems via secondary air-injection | Abstract |
| Mohd Faizal Mohideen Batcha | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Influence of Alkali Resistant (AR) Fiberglass in Porcelain Clay for Manufacturing Vitrified Clay Pipes | Abstract |
| Muhammad Ikhmal Hanapi, Sufizar Ahmad, Hariati Mohd Taib | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Inter-rater reliability of the new observational method for assessing an exposure to risk factors related to Work-related Musculoskeletal Disorders (WMSDs) | Abstract |
| Mohd Nasrull Abdol Rahman, Syahrul Aziana Abdul Rahman | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Inventory Policy Determination for Raw Materials in ILY Pharmaceutical using Periodic Review (R, s, S) and Periodic Review (R, S) Method to Minimize Total Inventory Cost | Abstract |
| Puteri Mely Permatasari, Ari Yanuar Ridwan, Budi Santosa | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Investigating the Linkage between Musculoskeletal Discomforts and Perceived Stress among Manufacturing Workers | Abstract |
| Nor Hazana Abdullah | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Microstructure and wear behavior of friction stir processed cast hypereutectic aluminum silicon alloy | Abstract |
| Samir Sani Abdulmalik, samir sani | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Mixture of natural fiber with gypsum to improve the fire resistance rating of a fire door: the effect of kapok fiber | Abstract |
| Azieyanti Nurain | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Modelling Dynamic Behaviour and Spall Failure of Aluminium Alloy AA7010 | Abstract |
| Norzarina Ma'at | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Modelling of Rigid Walled Enclosure Couple to a Flexible Wall using Matlab and Ansys APDL | Abstract |
| Izzuddin Zaman | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Modelling of Sound Radiation from Plate using Matlab and Ansys APDL | Abstract |
| Izzuddin Zaman | ||
| 8th International Conference in Mechanical and Manufacturing Engineering 2017 (ICME2017) | Morphology and Physical Behaviour of the LSCF-SDCC-Ag Composite Cathode with the Incorporation of Ag as an Additive Element | Abstract |
| Hamimah Abd.Rahman | ||
| 1 - 50 of 83 Items | 1 2 > >> | |
ICME is organised by the Faculty of Mechanical and Manufacturing Engineering, UTHM